1. Manuals
  2. Brands
  3. Metal Defender Manuals
  4. Metal Detector
  5. MD-33
  6. Quick start manual

Metal Defender MD-33 Quick Start Manual

Hide thumbs Also See for MD-33:
1
2

Advertisement

Table of Contents

IMPORTANT! READ BEFORE UNBOXING

Steps:

1. Two (2) people are required for the initial setup.
2. Carefully unpack your new walk thru metal detector.
3. After unpacking, you should have the following:
Two (2)
One (1)
One (1)
One (1)
Eight (8)
One (1)
4. On a Flat Clean surface, set the head module on the pad provided.
The head unit should be face down with the LED screens facing the
ground. Once the head module is positioned correctly; insert the keys
to open and access the motherboard.
5. Attach the Left and Right Uprights/Legs using the Bolts Provided -
DO NOT OVER TIGHTEN
Quick start guide for MD-33
LED Uprights/legs
Head Module & Keys
Top Rear Support
5mm (Hex) Allen key
Bolts & Nuts
Operation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MD-33 and is the answer not in the manual?

Questions and answers

Related Manuals for Metal Defender MD-33

Summary of Contents for Metal Defender MD-33

  • Page 1 IMPORTANT! READ BEFORE UNBOXING Quick start guide for MD-33 Steps: 1. Two (2) people are required for the initial setup. 2. Carefully unpack your new walk thru metal detector. 3. After unpacking, you should have the following: Two (2) LED Uprights/legs One (1) Head Module &...
  • Page 2 6. Connect the Communication Cables to each Upright and the Main PCB , make sure they are clipped into place. Once both of the connectors are secured and fastened in place, you can close and lock the head module with the keys. 7.

Table of Contents