Mixed-tender sale (cash or check tendering + credit tendering)
Example
Press the
NOTE
customer makes payment by checks or by credit account.
Computation of VAT (Value Added Tax)/Tax
VAT/tax system
The POS terminal may be programmed for the following six tax systems by your authorized SHARP dealer.
Automatic VAT 1 through 6 system (Automatic operation method using programmed percentages)
This system, at settlement, calculates VAT for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and
taxable 6 subtotals by using the corresponding programmed percentages.
Automatic tax 1 through 6 system (Automatic operation method using programmed percentages)
This system, at settlement, calculates taxes for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and
taxable 6 subtotals by using the corresponding programmed percentages, and also adds the calculated
taxes to those subtotals, respectively.
Manual VAT 1 through 6 system (Manual entry method using programmed percentages)
Procedure
This system provides the VAT calculation for taxable 1, taxable 2, taxable 3, taxable 4, taxable 5, and
taxable 6 subtotals. This calculation is performed using the corresponding programmed percentages when
the
key is pressed just after the
Manual VAT 1 system (Manual entry method for subtotals that uses VAT 1 preset percentages)
Procedure
This system enables the VAT calculation for the then subtotal. This calculation is performed using the VAT 1
preset percentages when the
can be used.
Key operation
950
through
keys or the
key.
To use a programmed rate
VAT rate
key is pressed just after the
Print
through
keys in place of the
key. For this system, the keyed-in tax rate
key when your
47