Table of Contents
Advertisement
02 Setting a destination, itinerary and route
||
Map type
1. In the navigation system's normal view,
press the thumb wheel/OK/MENU and
Settings
Map options
select
02
type.
2. Select how the map is to be displayed on
the screen:
•
North up
: the map will always have
north at the top of the screen. The
"vehicle" symbol will move in the cur-
rent direction on the screen.
•
Map heading up
bol will be at the center of the map and
will always point upward. The map will
rotate under the symbol, depending on
the direction of the road.
•
3D map basic
: the map will be dis-
played at an angle from above and the
"vehicle" symbol will be at the center
of the map and will always point
upward.
•
3D map enhanced
map basic but with objects such as
buildings, etc. displayed on the map.
Highway information
1. In the navigation system's normal view,
press the thumb wheel/OK/MENU and
Settings
Map options
select
Highway
information.
28
2. Select a function:
•
Map
•
Information about the current location
1. In the navigation system's normal view,
press the thumb wheel/OK/MENU and
: the "vehicle" sym-
select
Position
2. Select the type of information to be dis-
played:
•
•
: the same as 3D
•
Compass
The direction in which you are driving will dis-
played as a compass pointer or with letters.
Checked box: If you are driving on a
highway, the next 3 exits will be dis-
played, e.g., exits where there are rest
areas or gas stations. The list is sorted
so that the nearest exit is at the bot-
tom of the list.
Empty box: the function is deactivated.
Settings
Map options
information.
Current road
: the name of the road
where you are driving/cursor is point-
ing is displayed.
Lat/Long
: the location's co-ordinates
where you are driving/cursor is point-
ing is displayed.
None
: No information will be dis-
played.
The compass needle's red
pointer points to the north. A
text-based compass can
also be selected.
1. In the navigation system's normal view,
press the thumb wheel/OK/MENU and
Settings
Map options
select
Compass.
2. Select to display the compass needle or
letters:
•
Graphic
: a compass needle symbol
indicates the compass heading.
•
Text
: the letters N (north), W (west), S
(south) or E (east) indicate the com-
pass heading.
Set the map orientation (north or direction
toward the top of the screen). See also the
previous section "Compass."
Advertisement
Table of Contents
