Custom Installation - Sharp MX-M310 Software Setup Manual

CUSTOM INSTALLATION

The procedure for a custom installation of the software is explained below. Use the custom installation
procedure, when the machine is used as a shared printer on a network, or when installing the PC-Fax
driver.
1
The USB or parallel cable must not be
connected to the machine. Make sure
that the cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click the
[Cancel] button to close the window and
disconnect the cable.
Note The cable will be connected in step 11.
2
Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
3
Click the [Start] button, click
[Computer], and then double-click the
CD-ROM icon (
• In Windows XP, click the [start] button,
click [My Computer], and then
double-click the CD-ROM icon.
• In Windows 2000, double-click [My
Computer], and then double-click the
CD-ROM icon.
4
Double-click the [Setup] icon (
In Windows Vista, if a message screen
appears asking you for confirmation, click
[Allow].
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the license
agreement, and then click the [Yes]
button.
You can show the "SOFTWARE
Note
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
).
).
INSTALLING THE SOFTWARE
6
Read the message in the "Welcome"
window and then click the [Next] button.
7
Click the [Custom] button.
8
Click the [Printer Driver] button.
Before installing the software, be sure to
click the [Display Readme] button and view
the detailed information on the software.
T
5