Sharp MX-M310 Software Setup Manual page 8

INSTALLING THE SOFTWARE
9
Select [Connected to this
computer] and click the [Next]
button.
Follow the on-screen instructions.
When "The installation of the SHARP
software is complete." appears, click the
[OK] button.
• If you are using Windows Vista and a
Caution
security warning window appears, be
sure to click [Install this driver
software anyway].
• If you are running Windows 2000/XP
and a warning message appears
regarding the Windows logo test or
digital signature, be sure to click
[Continue Anyway] or [Yes].
6
10
When installing is finished, click
the [Close] button.
• If you are using Windows Vista and a
Caution
security warning window appears, be
sure to click [Install this driver
software anyway].
• If you are running Windows 2000/XP
and a warning message appears
regarding the Windows logo test or
digital signature, be sure to click
[Continue Anyway] or [Yes].
A message will appear instructing you to
connect the machine to your computer. Click
the [OK] button.
After the installation, a message
Note
prompting you to restart your computer
may appear. In this case, click the [Yes]
button to restart your computer.
11
Make sure that the power of the
machine is turned on, and then
connect the USB cable (p. 10).
Windows will detect the machine and a
Plug and Play window will appear.
12
Follow the instructions in the
Plug and Play window to install
the driver.
Follow the on-screen instructions.
• If you are using Windows Vista and a
Caution
security warning window appears, be
sure to click [Install this driver
software anyway].
• If you are running Windows 2000/XP
and a warning message appears
regarding the Windows logo test or
digital signature, be sure to click
[Continue Anyway] or [Yes].
This completes the installation of the
software.
After installation, see "CONFIGURING THE
PRINTER DRIVER" (page 11) to check the
printer driver settings.