Installing The Software; Standard Installation - Sharp MX-M310 Software Setup Manual

INSTALLING THE SOFTWARE

If an error message appears, follow the on-screen instructions to solve the problem. After the
Note
problem is solved, the installation procedure will continue. Depending on the problem, you may
have to click the [Cancel] button to exit the installer. In this case, reinstall the software from the
beginning after solving the problem.

STANDARD INSTALLATION

The procedure for a standard installation of the software is explained below. Normally, it is
recommended that you use the standard installation.
1
The USB cable must not be connected
to the machine. Make sure that the
cable is not connected before
proceeding.
If the cable is connected, a Plug and Play
window will appear. If this happens, click
the [Cancel] button to close the window
and disconnect the cable.
The cable will be connected in step 9.
Note
2
Insert the "Software CD-ROM" into
your computer's CD-ROM drive.
3
Click the [Start] button, click
[Computer], and then double-click the
CD-ROM icon (
• In Windows XP, click the [start] button,
click [My Computer], and then
double-click the CD-ROM icon.
• In Windows 2000, double-click [My
Computer], and then double-click the
CD-ROM icon.
4
Double-click the [Setup] icon (
In Windows Vista, if a message screen
appears asking you for confirmation, click
[Allow].
).
).
5
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the license
agreement, and then click the [Yes]
button.
You can show the "SOFTWARE
Note
LICENSE" in a different language by
selecting the desired language from
the language menu. To install the
software in the selected language,
continue the installation with that
language selected.
6
Read the message in the "Welcome"
window and then click the [Next]
button.
7
Click the [Standard] button.
Follow the on-screen instructions.
3