Options Menu: Ext Input - Theben SELEKTA top2 Series Manual

Astronomical time switches with weekly program
Table of Contents

Advertisement

11.2. OPTIONS menu: Ext input

At the external time switch control input, one switch or
several buttons per channel can be connected. The control
input can be used to call up the following functions: override,
timer, staircase light, perm ON, perm OFF, only astro and
special 1 astro prog.
Example 1: For corridor or staircase lighting with a
permanent light phase controlled by astro times, adjustable
short-term lighting can be activated outside this phase
controlled by buttons. Several buttons in the staircase can be
switched parallel to the input.
Example 2: The entrance to a yard is illuminated according
to astro times and also switched off in the early hours of the morning, e.g. between 12:00 AM and 5:00
AM. If required or in special circumstances, the light can be manually set to permanently on via a
switch outside of the astro times and programmed switching times (perm ON/OFF).
Press the MENU button to open the main menu from auto mode.
Press button ► three times and confirm the OPTIONS menu with the OK button.
Press button ► until EXT INPUT appears on the display and confirm with the OK
button.
Use button ► to select the desired channel, then press OK (only for 2-channel devices).
There are three sub-menu items:
Use button ► to change between
Page | 64

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents