Standard: Modifying Switching Times - Theben SELEKTA top2 Series Manual

If no switching time has been programmed on a week day, this day is shown with
-- : --.
When all the week days have been called up, END appears on the display. Confirm
with the OK button to return to auto mode.
Sub-menu during the check:
If the OK button is pressed during the check, a sub-menu is activated:
NEXT  Press the OK button: the next switching time is shown.
PREVIOUS  Press the OK button: the switching time shown is displayed again.
MODIFY  Press the OK button: the switching time shown can be changed.
DELETE  Press the OK button: the switching time shown can be deleted.
At END  Press the OK button: the switching time check ends.
Note:
If no button is pressed for more than 1 minute, the system returns to auto mode.

8.1.3. STANDARD: Modifying switching times

You can change switching times in the MODIFY sub-menu of the CHECK menu or select the
PROGRAM menu MODIFY directly.
Example:
The night break time on Friday needs to be changed from 11:00 PM to 5:00 AM to 11:30 PM to 6:00
AM.
Page | 31