Time/Date Menu: Time - Theben SELEKTA top2 Series Manual

9.1.

TIME/DATE menu: Time

Press the OK button.
Press the OK button.
Example: The time 1:21 PM needs to be set.
Note:
If a DCF or GPS antenna is connected (only possible with SELEKTA 171 top2 RC), the time cannot be
changed, since automatic time synchronisation has already been performed via the antenna. The time
can then only be called up.
Use the buttons ◄ and ► to enter the correct time. To do so, first enter the hours and
press OK to confirm.
Then use the buttons ◄ and ► to enter the minutes and press OK to confirm.
Note:
As soon as the hours or minutes are changed, the seconds are reset to 00, where they remain. It is
not until the minutes of the newly set time have been confirmed with the OK button that the time switch
continues to run. As such, the time switch can be restarted synchronised to the second with real time.
In the event that the time was only checked and not changed, the system returns to the TIME menu
item.
Now the TIME menu can be selected again (OK button).
With the button ► it is possible to change to the other menu items in the TIME/DATE
menu or to scroll to the END and return to auto mode using the OK button.
The menu can also be exited with the MENU (ESC) button.
Comment:
If the time has been changed, the system returns to auto mode automatically after confirmation with
the OK button.
Page | 47