Getting Started; Attaching The Sensor To A Club - Garmin APPROACH CT10 Owner's Manual

Hide thumbs Also See for APPROACH CT10:

Table of Contents

Getting Started

WARNING

See the Important Safety and Product Information guide in the product box for product warnings and other

important information.

1 Screw the sensor into the hole at the end of the grip.

2 Tighten the sensor so it does not move during use.

3 Return the club to your golf bag.

Using a Partial Set of Sensors

Compatible Garmin

golf devices feature automatic shot detection and recording. If you purchased the starter

pack of sensors, Garmin recommends you attach the sensors to your putter and wedges to improve the Garmin

AutoShot

feature. For automatic scoring, a sensor must be attached to your putter to accurately detect the

™

number of strokes.

Using the Sensors Without Garmin AutoShot

Compatible Garmin golf devices that do not have the Garmin AutoShot feature must use a full set of club

sensors. When paired with a full set of club sensors installed on all your golf clubs, you can automatically track

your golf shots, including location, distance, and club type.

Getting Started

Table of Contents