Vivax LED TV-32S60T2S2SM Instruction Manuals page 200

ENG
When I turn On my
television, there is a few
second delay before the
picture appears. Is this
normal?
Picture is normal, but no
sound.
Sound but no picture or
black and white picture.
Sound and picture
distorted or appear wavy.
Sound and picture is
blurry or cuts out
momentarily.
Horizontal/vertical stripe
on picture or picture is
shaking.
The plastic cabinet
makes a "clicking" type
of sound.
Remote control does not
work.
• Yes, this is normal. That is the TV searching
for previous setting information and initializing
the TV.
• Check the volume settings.
• Check if Mute mode is set "on".
• If black and white picture first unplug TV from
AC outlet and re-plug after 60 seconds.
• Check that the Colour is set to 50 or higher.
• Try different TV channels.
• An electrical appliance may be affecting TV
set. Turn off any appliances, if interference
goes away, move appliance farther away
from TV.
• Insert the power plug of the TV set into
another power outlet.
• If using an external antenna, check the
direction, position and connection of the
antenna.
• Adjust the direction of your antenna or reset
or fine tune the channel.
• Check if there is interfering source nearby,
such as appliance or electric tool.
• "Click" sound can be caused when the
temperature of the television changes. This
change causes the television cabinet to
expand or contract, which makes the sound.
This is normal and the TV is OK..
• Confirm that TV still has power and is
operational.
• Change the batteries in the remote control.
• Check if the batteries are correctly installed.
45
VIVAX