Steps
1. Align and place the battery cable on the battery.
2. Route the battery cable through the routing guides on the battery.
3. Connect the battery cable to the connector on the battery.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Enter
service
mode.
About this task
The following images indicate the location of the WLAN card and provide a visual representation of the removal procedure.
After working on your computer
before working inside your
.
computer.
Removing and installing components
27