Installing the display back-cover
Prerequisites
NOTE:
The display back-cover installation procedure is applicable only for Latitude 5320 laptop and not for the 2-in-1
configuration.
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the display back-cover and provides a visual representation of the installation
procedure.
Steps
Place the display back-cover on a flat surface and perform the following steps to install the display back cover.
Next steps
1. Install the
eDP
cable.
2. Install the camera.
3. Install the
display
panel.
4. Install the
display
hinges.
5. Install the
display
bezel.
6. Install the
display
assembly.
7. Install the battery.
8. Install the
base
cover.
9. Follow the procedure in
after working inside your
computer.
Removing and installing components
69