Installing The Led Board - Dell Latitude 5320 Service Manual
Hide thumbs
Also See for Latitude 5320:
- Service manual (77 pages) ,
- Setup and specifications manual (30 pages) ,
- Setup and specifications (23 pages)
Table of Contents
Advertisement
About this task
The following image indicates the location of the LED board and provides a visual representation of the removal procedure.
Steps
1. Open the latch and disconnect the LED-board cable from its connector on the system board and LED board.
2. Remove the single screw (M2x3) that secures the LED board to the palm-rest assembly.
3. Lift the LED board and cable away from the palm-rest assembly.
Installing the LED board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
74
Removing and installing components
Advertisement
Table of Contents
