I/O Screen (Device Tab) Options - Honeywell Gamewell-FCI NGA Operation Manual

I/O Screen

8.6 I/O Screen (Device Tab) Options

Table 8.6.1 describes the options that appear on the I/O, Device tab screen.
I/O Screen
(Device Tab)
Controls
LOOP
RANGE
ADDRESS
SHIFT
ENABLE/DISA
BLE
UP/DOWN
X
32
Tap LOOP to enable a direct entry of a loop number (loop 1, loop 2 or
discrete devices). To select discrete devices, enter "0".
Tap RANGE to toggle between Sensors, Modules and Bases.
Tap ADDRESS to enable a direct entry of a device address.
Press SHIFT to move the focus of the yellow highlight between Loop and
Address.
If this button reads "ON", it will manually activate this output device. If this
button reads
"AUTO", it will return the device to its normal automatic operation.
Use the up and down arrow buttons to scroll to either the Loop or the
Address based on which control appears highlighted in yellow. Use the
SHIFT button to shift the focus.
Press the "X" button in the upper right corner to close this screen.
Table 8.6.1 I/O Screen (Device Tab) Controls
Network Graphic Annunciator (NGA) Operations Guide P/N 9020-0675:B1 03/21/13
I/O Screen (Device Tab) Options
Description