Section 8: I/O Screen; I/O Screen (Node Tab); I/O Screen (Node Tab) Options - Honeywell Gamewell-FCI NGA Operation Manual

The I/O screen allows the user to enable or disable sensors or modules connected to any 
ILI-MB-E3, ILI-S-E3, ILI95-MB-E3 and ILI95-S-E3 on the network. In addition, any output
module connected to an ILI-MB-E3, ILI-S-E3, ILI95-MB-E3 and ILI95-S-E3 may be manually
activated or returned to its normal automatic operation. The following tabs appear on the I/O
screen:

8.1 I/O Screen (Node Tab)

When the I/O screen first appears, the Node tab will be active. The Node tab allows the user to
specify which ILI-MB-E3 or ILI-S-E3 node to control. Figure 8.1.1 illustrates the screen that
appears on the Node tab from the I/O screen.

8.2 I/O Screen (Node Tab) Options

Table 8.2.1 describes the controls that appear on the I/O, Node Tab screen.
I/O Screen (Node
Tab) Controls
Node Tab
UP / DOWN
X
Network Graphic Annunciator (NGA) Operations Guide P/N 9020-0675:B1 03/21/13

Section 8: I/O Screen

• Node •
Figure 8.1.1 I/O Screen (Node Tab)
Use the Node tab to display a Numeric Entry screen that allows direct
entry of the desired node number.
Use the up and down arrows to scroll through the list of available
nodes.
Press the "X" button in the upper right corner to close this screen.
Table 8.2.1 I/O Screen (Node Tab) Controls
Device • Output
Description
29