Chapter Three: Operating Instructions; Power On; Power Off; Battery Lifetime - NeuroMetrix NC-stat DPNCheck User Manual

5
NC-stat DPNCheck Device User Manual

CHAPTER THREE: OPERATING INSTRUCTIONS

This chapter explains the basic operation of the NC-stat DPNCheck device.

3.1 Power On

To power on the device, press the grey button under the LCD Display Screen. The green light will blink
once to indicate power on and indicates that the device is ready for use.

3.2 Power Off

The device will power off automatically after 10 minutes of inactivity. Note: Your last test is saved on the
device until a new test is performed.

3.3 Battery Lifetime

The NC-stat DPNCheck is powered by a 3V Lithium Ion Battery. A solid amber light will indicate that the
battery is low and should be replaced as soon as you complete the test in progress. A solid red light
accompanied by indicates that the battery must be replaced before any further testing. See section
2.3 for battery installation.

3.4 Test Procedure

Proper patient positioning, skin preparation, and device placement are essential to accurately
administer the test. The section below will demonstrate proper techniques.
©2021 NeuroMetrix, Inc. All Rights Reserved. PN2203282 Rev N