Table of Contents
Advertisement
Appendix D: USB CONNECTION
Uploading Data
The most recent test results may be uploaded to your PC using a USB cable. A mini-USB port is located
on the side of the device. The device can only retain data from a single test. Users must upload the data
after each test for report generation. Note: If the device powers off before performing an upload, the
data is still saved on the device and may be uploaded.
1. Power on the device.
2. Open the USB port located on the side of the device.
3. Ensure that the Communicator application is open on the PC.
4. Connect the USB cable to the device and PC.
5.
After connecting the device to the PC with the USB cable, the device LCD screen will display PC.
Note: If the red light on the device appears during this step, the data could not be transferred.
See Appendix F for Troubleshooting.
16
NC-stat DPNCheck Device User Manual
©2021 NeuroMetrix, Inc. All Rights Reserved. PN2203282 Rev N
Advertisement
Table of Contents
