Installing Speakers - Samsung HT-P1200 Instruction Manual

Installing the DVD player
Tidying Cables Up
Push the cables connected to the
1
HDMI OUT, Component OUT, Video
OUT ports into the groove shown
in figure 1 using the Wire Hanger.
Push the cables connected to the
2
Audio IN, Anynet IN/OUT, Optical
Digital Audio IN and Audio OUT ports
into the groove shown in figure 2.
Open the holder cover of the round
3
board on the bottom of the stand and
pass the cables through the holder.
4
Squeeze the cables into the groove on
the holder of the round board.
5
Close the holder cover.
Speaker Packages
Front/Rear Speaker (4EA)
15
Center Speaker
Subwoofer Speaker
(con't)
Wire Hanger
1
Rear Side of
the Main Unit
2
Round Board Holder
Please confirm that all the following contents are
included in the package.
Front/Rear Stand (4EA)
Speaker Accessories
Speaker Cable (5EA) Screw (8EA)

Installing Speakers

Assembling the Speakers
1
Set the front speaker on the
front stand.
Connect the front speaker
2
cable to the rear side of the
front stand.
3
Fix the speaker and the
stand with the screws.
Note
• Connect the speaker cable to the connection port of either the front speaker or the front stand. Both of
the connection ports will work.
•
If you have combined the front speaker and the stand, connecting the speaker cable to the connection
port on the rear side of the front stand is recommended.
To mount the speakers on the wall
Drive screws (2) into the wall for each
speaker and then hook the front and rear
speakers over them.
Hook the speakers
so that the screws are
in the position of the
figure.
16
ENG