Speaker Components; Installing The Speakers On The Tallboy Stand - Samsung HT-F450 User Manual

Speaker Components

HT-F450
HT-F453
(L)
FRONT

Installing the Speakers on the Tallboy Stand

* HT-F453 only - Front Speakers
* HT-F455 only - Front/Surround Speakers
1 . Turn the Stand Base upside-down and connect it to the
Stand.
2 . Use the driver to combine the screws on the 3 marked
holes.
| CAUTION |
When you use a torque screwdriver, be careful not to put
\
excessive force. Otherwise, it runs idle or can be damaged.
(torque screwdriver- below 15 kg.f.cm)
Straighten a supplied speaker wire to the gravity direction
3 .
and put in the hole on the center of Stand Base.
4 . Connect the upper Speaker to the assembled Stand.
5 . Insert a screw clockwise into the hole on the rear of the
speaker using a screwdriver. And then connect a speaker
cable.
6 . This is the appearance after the speaker is installed.Follow
this steps to install other speaker.
0_50_ZC_1221.indd 13 -F5530_50_ZC_1221.indd 13
HT-F5530_50_ZC_1221.indd 13
HT-F5530_50_ZC_1221.indd 13
(L) (R) (L) (R)
FRONT SURROUND
(R)
SURROUND
STAND
STAND BASE SCREW (5×20): 8EA
CENTER
HT-F455
(L) (R)
(L) (R)
FRONT SURROUND
English
SPEAKER CABLE
SUBWOOFER
(L) (R)
STAND BASE SCREW (5×20): 16EA
1 2
Stand Base
Stand
3 4
Speaker
Stand
5 6
13 13
| |
English
English
2012-12-21 오후 5:18:48 2012-12-21 오후 5:18:48
2012-12-21 오후 5:18:48
STAND
13
|
13
|
English
11
|
English
2012-12-21 오후 5:18:48