How To Connect To Anynet; Connecting The Fm Antenna - Samsung HT-P1200 Instruction Manual

How to Connect to Anynet

Using a Samsung Anynet-enabled TV, you can control the DVD Home Theater System and
any other Samsung Anynet-enabled AV device. For detailed operation instructions and
connection diagram, refer to the user's manual of your Samsung Anynet-enabled TV.
What is Anynet?
• The Anynet function allows you to use your Samsung TV's remote control and menu to control all AV devices.
• However, this function is available only with Samsung Anynet-enabled models.
Use this to connect Anynet-
enabled AV devices.
1
Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet
output terminal.
2
Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung
external AV devices.
3
Refer to the user's manual of your Anynet-enabled TV and activate the Anynet function.
This function is available only with Samsung Anynet-enabled TVs.
*
•
Caution If the Anynet input and output terminals are reversed, communication with the TV will fail and
you will not be able to use the Anynet function.
25

Connecting the FM Antenna

FM antenna connection
1
Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2
Slowly move the antenna wire around until you find a location where reception is
good, then fasten it to a wall or other rigid surface.
ENG
26