Remote Control - Samsung HT-P1200 Instruction Manual

Description

—Remote Control—

TV indicator
TV, DVD POWER button
MODE button
SLEEP button
Number(0~9) buttons
REMAIN button
MUTE button
VOLUME button
MENU button
SUB TITLE button
RETURN button
MOVIE button
MUSIC button
EZ VIEW button
STEP button
HDMI AUDIO ,SELECT button
PL II MODE button
REPEAT button
SD/HD button
11
DVD RECEIVER indicator
OPEN/CLOSE button
TV/VIDEO, DIMMER button
DVD button AUX button
TUNER button
CANCEL button
Play/Pause button Stop button
Tuning Preset/CD Skip button
SUPER 5.1, Virtual Headphone button
TUNING/CH button
INFO. button
AUDIO button
Cursor/Enter button
ZOOM button
Auto Sound Calibration button
TEST TONE button
SOUND EDIT button
LOGO COPY button
PL II EFFECT button
TUNER MEMORY, DCDi button
MO/ST, SLOW button
Insert Remote Batteries
1 2
Remove the battery Insert two 1.5V AAA
cover on the back batteries, paying
of the remote by attention to the correct
pressing down and polarities (+ and –).
sliding the cover in
the direction of the
arrow.
Follow these precautions to avoid leaking or cracking batteries:
Caution
•
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
•
Use the correct type of batteries.Batteries that look similar may differ in voltage.
•
Always replace both batteries at the same time.
•
Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23 feet/7 meters in a straight line.
It can also be operated at a horizontal angle of up to 30° from the remote control sensor.
ENG
3
Replace the battery
cover.
12