Connecting External Components - Samsung HT-P1200 Instruction Manual

Connecting External Components

Connecting an External Digital Component
Example: Digital signal components such as a Set-top Box or CD Recorder.
Optical Cable
(not supplied)
1
Connect the Digital In 1 or 2 (OPTICAL) on the main unit to the Digital Output on the
external digital component.
2
Press AUX on the remote control to select 'D.IN 1 or D.IN 2'.
• Each time the button is pressed, the selection changes as follows: USB
AUX.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD D.IN 1
23
D.IN 1 D.IN 2
D.IN 2 AUX USB FM.
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
1
Connect Audio In on the Home Theater to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Press AUX on the remote control to select AUX.
• Each time the button is pressed, the selection changes as follows: USB
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD D.IN 1
•
To listen to the audio from the TV in 5.1 channel through the main unit, press the Dolby Pro
Note
Logic II or the SUPER 5.1 button.
•
You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on
the VCR to this product.
Audio Cable (not supplied)
If the external analog component has only
one Audio Out, connect either left or right.
D.IN 1 D.IN 2 AUX.
D.IN 2 AUX USB FM.
24
ENG