Connecting the Speakers
Connecting the Main Unit and Sub Woofer
1
Connect the DIN Audio Out of the main unit and
the DIN Audio In of the sub woofer with the DIN
audio cable.
2
Press the power button of the sub woofer to turn it
on.
Sub Woofer Functions
Subwoofer: With the built-in, dedicated 150W amplifier, the subwoofer generates rich bass sounds.
Crossover: The Crossover sets the cutoff frequency for the subwoofer. Set the Crossover control
for the best bass response in your room.
•
You can adjust the bass or treble output from the front, rear, center speakers and the
subwoofer.
•
To the left increases the bass and to the right, treble.
1
19
(con't)
Rear of Subwoofer
Rear of Main unit
1 Power LED
2 Power button
2
3 External Audio Input Connector
3
4
4 Crossover Controller
5
5 Speaker Output Terminals
Connecting the Video Out to TV
Choose one of the three methods for connecting to a TV.
METHOD 3
METHOD 2
METHOD 1
(supplied)
TV
METHOD 1
.......
Composite Video
(Good Quality)
- Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your TV.
METHOD 2
.......
Component
(Better Quality)
- If your television is equipped with Component Video inputs, connect a component video cable
(not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding
jacks on your TV.
METHOD 3
.......
HDMI
(Best Quality)
- Connect the HDMI out to the HDMI input on your TV.
•
This product operates in Progressive scan mode(Only 480p) for Component Output.
Note
•
If the TV only supports a resolution of 576i(480i), the screen may be divided into 2
screens, or display nothing.
ENG
HT-P1200
20