3.4
REMAINING SYSTEM INSTALLATION
HC05L1EM USER'S MANUAL
When you have configured headers P4, P5 and P6, you are through with
L1EM configuration.
Find jumper header J1 of the HC05EVS platform board. Make sure that
two fabricated jumpers are installed, per the diagram below.
J1
A14
1
A13
3
A12
5
A11
7
FABRICATED
JUMPER
To install the L1EM on an HC05EVS platform, fit together EM connec-
tors P2 and P3 (on the bottom of the board) and platform-board connec-
tors P3 and P4. Snap the mounting holes of the EM onto the plastic
standoffs.
At this point, you are ready to make remaining cable connections, as
necessary, and restore power. For instructions, consult the HC05EVS
operations manual.
2
4
6
8
3
MOTOROLA
3-7