Table of Contents
Advertisement
5.
INSTALLATION & WIRING
5.1. Installation
The B-260-SWTCH-4x1 can be placed on a solid and stable surface, installed on a standard
equipment rack shelf, or mounted to a wall or distribution box. When installed on a rack shelf,
wall, or distribution box we strongly recommend that the included mounting ears be used to
secure the device. When installing on a solid surface the use of the mounting ears is optional.
Steps to install the switch using the supplied mounting ears:
1. Attach one of the mounting ears to the enclosure using the screws provided in the package.
2. The mounting ear is attached to the enclosure as shown below.
3. Repeat steps 1-2 for the other side of the switch.
4. Mount the switch on a solid surface, rack shelf, wall, or distribution box with the included
mounting screws by screwing the mounting ears to the surface you are mounting to.
5.2. Wiring
Warning: Before beginning any wiring be sure to disconnect the power from all
devices in the system..
Steps for device wiring:
1. Connect HDMI IN
Connect the HDMI sources (such as PC, Blu-ray player, Apple TV, 4K media player, etc) to
the HDMI IN 1-4. Ensure you are using a high-quality HDMI cable capable of supplying the
maximum resolution you require. .
2. Connect HDMI OUT
Connect the HDMI display device (such as a TV, projector, LED/LCD display or other display
device) to the HDMI OUT. Ensure you are using a high-quality HDMI cable capable of
supplying the maximum resolution you require.
3. Connect additional control options, as required:
•
IR Control: Refer to IR Control Wiring section for more details on using IR to control
the switcher.
•
RS-232 Control: Refer to RS-232 Control Wiring section for more details on using RS-
232 to control the switcher.
4. Connect the DC 12V power cord provided.
5. Power on all connected devices.
8
Advertisement
Table of Contents
