B-260-Swtch-4X1 Rear Panel - Binary B-260-SWTCH-4X1 Installation Manual

4.2. B-260-SWTCH-4x1 Rear Panel

1
1. +12V DC
Connect the provided 12Vdc power supply's cord and tighten it in place.
2. HDMI IN (1-4)
Connect to the output of HDMI source(s) to the input(s) you require.
3. HDMI OUT
Connect to the input of a HDMI display or other similar device.
4. IR Receiver PWR
On: IR receiver port supplies 12V power.
Off: IR receiver port does not supply 12V power.
Note:
• The unit can be controlled through an IR receiver (sold separately) in the ON position.
• The unit can be controlled with a standard mono cable from a control system in the
OFF position.
5. IR EXT.
IR extension port. Connect an IR extension cable, control cable or external IR receiver (not
included) .
When connecting to an unpowered IR receiver or a control device, ensure that the IR
Receiver Power Switch is in the OFF position.
When connecting to a powered IR receiver, ensure that the IR Receiver Power Switch is in
the ON position.
6. RS-232
rd
Connect to a 3
2
party RS232 control device for RS232 Control.
3
7
4 5 6