Filmcity FC-CTH Assembly Manual

Power dslr camera cage

Hide thumbs Also See for FC-CTH:

Download this manual

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

2 x 300mm Female

Threaded Rods

2 x 200mm Female

Threaded Rods

3 x 150mm Female

Threaded Rods

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

Power DSLR Camera Cage

A s s e m b l y M a n u a l

Camera Base with Quick Release

3 x 100mm Male

Threaded Rods

2 x 70mm Female

Threaded Rods

statutes or in writing by the Publisher.

Cage Top Plate

2 x Side Handles

(FC-CTH)

Accessory Mounting

Adapter

Top

Accessories

Handle

Page 1 Power DSLR Camera Cage (FC-CTH) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Camera Cage Setup  Insert the 300mm female threaded rod into the camera base and tighten with allen key.  Attach the quick release adapter base with the quick release plate of your tripod and tighten the bolt to secure properly.
Page 3  Attach the rods on the cage base plate and tighten the knob to secure properly.  Screw-in the 100mm male rods to extend the height of cage.  Attach the Accessory mounting bracket and tighten with the allen key. ...
Page 4  Now attach the top handle and tighten the knob to secure it properly. YOUR FILMCITY POWER DSLR CAMERA CAGE ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.