Cleaning The Refrigerator Food - Electrolux ETB4600 User Manual

CLEANING YOUR REFRIGERATOR
WARNING
ARNING
BEFORE CLEANING: Turn the refrigerator off at the power
point and unplug the cord to prevent any chance of
electrocuting yourself.
Doors and exterior (white and silver):
You should only clean the doors with lukewarm soapy
water and a soft cloth.
CAUTION
Never use stainless steel cleaners, abrasive pads or other
cleaners that will scratch the surface. Damage to the
appliance after delivery is not covered by your warranty.
Interior
Clean the inside of your refrigerator regularly with a soft
ARNING
cloth, unscented mild soap and lukewarm water.
Thoroughly dry all surfaces and removable parts and
avoid getting water on the controls. Replace removable
parts, plug power cord in and switch the power on before
returning the food.
Water Tank Assembly
Clean the inside of the water tank regularly with a soft
cloth, unscented mild soap and rinse thoroughly with
lukewarm water to completely remove any soap residue.
To remove the lid follow these steps:
1. Unclip the front 2 clips and
2. rotate lid up and off the rear clip.
3. Lift lid off tank
2
1
18 CLEANING
3
Door seals
Always keep door seals clean by washing them with a mild
detergent and warm water, followed by a thorough drying.
Sticky food and drink can cause seals to stick to the cabinet
and tear when you open the door.
ARNING
CAUTION
Never use hot water, solvents, commercial kitchen cleaners,
aerosol cleaners, metal polishes, caustic or abrasive
cleaners, or scourers to clean your refrigerator. Many
commercially available cleaning products and detergents
contain solvents that will damage your refrigerator. Use only
a soft cloth with an unscented mild soap and lukewarm
water.
To clean a crisper or freezer bin with telescopic extension
slides, simply wipe with a damp cloth and warm soapy
water. Never immerse the cover in water, as this could affect
the operation of the slide.
Switching off your refrigerator
If you switch off your refrigerator for an extended period,
follow these steps to reduce the chances of mould:
1. Remove all food.
2. Remove the power plug from the power point.
3. Thoroughly clean and dry the Interior.
4. Ensure that all the doors are wedged open slightly for
air circulation.