Error Codes - Electrolux ETB4600 User Manual

ERROR CODES & ALARMS
Alarms
ALARM ICON
Non Electronic
Display
Non Electronic
Display

Error codes

ERROR CODE
Communication Error
Non Electronic
Display
Sensor – Open Circuit /
Short Circuit
Non Electronic
Display
WHAT IT MEANS
Freezer Temperature Alarm
Activates if the freezer temperature is 10°c
over set temperature for a period of 50
minutes (except during a defrost).
An alarm will sound the temperature icons
will flash.
Door Alarm
Activates if the refrigerator or freezer doors
are left open for longer than 2 minutes.
An alarm will sound and the affected
compartment icon will flash and the
temperature and icons will fade on and off.
WHAT IT MEANS...
If you see this icon displayed (electronic
display models) or the top temperature icon
is flashing it means that the control has lost
contact with the main control board.
The appliance will operate at its last
known setting, all auxillary functions will not
work.
If you see this icon displayed (electronic
display models) or any combination of the
second and fourth temperature icons are
flashing it means that an error has been
detected on a sensor.
The refrigerator will run in a default cycle to
prevent food spoilage.
OPERATION
• To deactivate the alarm for 50 minutes
press any button.
• To deactivate alarm for 12 hrs on the ice
& water model press and hold Select
Mode for 10 seconds for non ice and
water models press and hold any button
for 10 seconds.
• Alarm will sound and icon will flash
indicating which door is open.
(Ice & water models)
• To silence the alarm for 8 minutes while
the door is open press any button (the
icons will continue to flash until door is
closed).
WHAT TO DO...
Turn the unit off at the power
for 5 minutes and then turn it back on.
Under most circumstances this will
reset the display enabling normal
function to continue.
If the error re-occurs then call
for service.
Call for service.
ERROR CODES AND ALARMS 17
point