Csu Code Loop Detect; Ds1 Timing Source; Ds1 Network Source; Dsx-1 Line Build Out - ADTRAN Total Access 3000 Installation And Maintenance Practice

Remote Management Module Installation and Maintenance Practice

CSU Code Loop Detect

CSU Code Loop Detect provisions if the unit responds to CSU loopback codes.
• Enabled: Unit responds to CSU loopback codes
• Disabled: Unit does not respond to CSU loopback codes

DS1 Timing Source

DS1 Timing supports the following two options:
• Local
• Recovered

DS1 Network Source

DS1 Network Source supports the following two options:
• MUX
• DSX-1

DSX-1 Line Build Out

DSX-1 Line Build Out specifies the line length for the DSX-1. It supports the following
options:
• 0 – 133 feet
• 133 – 266 feet
• 266 – 399 feet
• 399 – 533 feet
• 533 – 655 feet
This option has no effect if DS1 Network Source is set to MUX.

DSX-1 Line Coding

DSX-1 Line Coding supports the following two options:
• B8ZS
• AMI
This option has no effect if DS1 Network Source is set to MUX.
16
NOTE
NOTE
61181019L1-5C