Design USB_D+ / USB_D- connection as 90 Ω differential pair.
2.1.3 Antenna checklist
Antenna should have 50 Ω impedance, V.S.W.R less then 3:1, recommended 2:1 on operating bands in
deployment geographical area.
Follow the recommendations of the antenna producer for correct antenna installation and deployment
(PCB layout and matching circuitry).
2.2 Connectors (FW75)
The following design information is to aid the design for proper selection of mating connectors and antennas.
2.2.1 FW75-C200 modem connector
Manufacturer
Series
Name
Molex
SlimStack
Table 26: FW75-C200 modem connector
Figure 27: FW75-C200 modem connector
2.2.2 FW75-C200 Board to Board host connector
Manufacturer
Series
Name
Molex
SlimStack
Table 27: FW75-C200 host mate connector
UBX-13000620 - R21
Part No.
Specification
52991-
PS-54-167-002
0808
Part No.
Specification
53916-
PS-54-167-002
0808
Early Production Information
LISA-C2 series and FW75-C200 - System Integration Manual
Description
Remarks
Receptacle 80 pins,
Website : www.molex.com
0.50mm pitch, 4mm
•
stacking height
•
Description
Remarks
Header 80 pins,
Website : www.molex.com
0.50mm pitch, 4mm
•
stacking height
•
Drawing: 529910708_sd.pdf (mechanical,
land pattern and reel specifications)
Data sheet :
05339160208_PCB_RECEPTABLES.pdf
Drawing: 539160208_sd.pdf (mechanical,
land pattern and reel specifications)
Data sheet :
05339160208_PCB_HEADERS.pdf
Design-In
Page 54 of 103