General Introduction; Install The Rechargeable Battery To The Camera - Reolink Argus 2 Operational Instruction

General Introduction

Micro SD Card Slot
Reset Hole
Press the reset button with a
pin to restore factory settings.
Daylight Sensor
Lens
Status LED
Built-in Mic
Built-in PIR Motion Sensor
Speaker
Wall Mount
Only for Argus 2
The LED in Red (WiFi connection failed)
Blinking: Standby status
On: Working status
2 English
The LED in Blue (WiFi connection succeeded)
Blinking: Standby status
On: Working status

Install the Rechargeable Battery to the Camera

• Please press the button (on the top of the back casing), and slide the back casing
!
downward to close it. The button also needs to be closed firmly for good weatherproof
performance.
• For the weatherproof performance, always cover the USB charging port with the rubber
plug.
English 3