Table of Contents
Advertisement
UGO BASILE - I
Erase memory
All stored data
will be lost
Cancel
Press Cancel to return to the start of the Measure menu. Pressing Confirm will erase all
data memory. The configuration settings will not be changed.
The Erase Memory option is offered automatically after data is transferred to the PC.
4.4.6
Back to Main Menu
Press Next option to return to the first Measure menu screen. Press Select this to return
to the Main Menu.
4.5 Configure Menu
When Configure is selected from the Main Menu, the following screen is shown:
Configure Menu
--------------------
Set
config
Pressing Set config allows the user to adjust a number of configuration settings in PAM.
These include options related to the measurement process such as whether the
measurement is ended automatically by removing the applied force or manually by pressing
the foot trigger switch but also covers more general settings such as the brightness of the
display and the period of inactivity before PAM will switch itself off.
For example, by pressing Set Config, the first configuration option appears:
Configuration Menu
Force lvl Foot pedal
---------
Next
This screen lets the user choose between ending the measurement automatically and
ending it by pressing the Foot Pedal. The line under Force lvl indicates that the end on
force level option (factory default) is selected.
Pressing Change gives:
TALY
Confirm
Restore
defaults
Change
Page 15
38500 Instruction Manual (Rev.1)
Advertisement
Table of Contents
