Table of Contents
Advertisement
UGO BASILE - I
Copies of the instruction manual are available free of charge upon request: please contact
our service department (see paragraph 7.2-Customer Support) specifying the series number
of your instrument.
3.3 Charging the Internal Battery
The instrument is dispatched from the factory with a fully charged battery. However, it is
recommended that the battery is charged before initial use by connecting it to a USB socket
on a functioning PC or to a suitable power adapter, using the USB cable provided. PAM
should be charged initially for at least 3 hours.
3.4 Connections
Plug one of the force transducers and the foot pedal into the PAM electronic unit, by using
the connectors located in the back panel.
3.5 Installing the PAM Software
The software provided with PAM should be installed on a suitable Windows PC, running
Windows Vista or XP.
First, install the software, by double-clicking on the Set-up.exe file; follow the instructions
until installation is complete.
Then, connect the PAM via a USB port. The PAM will be automatically recognized and the
drivers should install automatically, by simply following the instructions on the screen.
The Ugo Basile PAM Software can now be launched from the desktop icon or from the
Program Files folder.
See section 6, for instructions on how to use the Ugo Basile PAM Software.
3.6 Additional Safety Consideration
a.
Use original accessories and spare parts only, see also paragraph 8-ORDERING
INFORMATION;
b.
Do not operate the instrument in hazardous environments or outside prescribed
environmental limitations (i.e. +18C°/+24C°, 60% relative humidity, non-
condensing);
c.
Do not spray any liquid on the connectors;
d.
Keep inflammables far from the instruments.
TALY
Page 6
38500 Instruction Manual (Rev. 1)
Advertisement
Table of Contents
