Table of Contents
Advertisement
Press the Reset (left) soft key (
3.
User Memory
User Memory lets you use your device as one (internal memory only) or two (internal
memory + optional Memory Card) USB flash drives.
Connect Device
To connect your device to a personal computer as a USB flash drive, do the following:
Use the Data Cable supplied with your device to connect it to a personal computer
1.
USB port.
In standby mode, press the MENU (left) soft key (
2.
and
USB Disk Mode — Lets you load files onto your device.
•
File Manager — Lets you manage loaded files.
•
Memory Info — Lets you review used and available memory. (See "Memory Info" on page
•
80 for more information.)
Use the Up and Down navigation keys to highlight USB Disk Mode.
3.
Press the
4.
Note: The default password is '0000'.
Enter the device password using the keypad keys. "To avoid data loss please eject
5.
device before removing it." pops-up in the display, followed by the USB Disk Mode
screen.
You can now use the device like a USB flash drive.
Disconnect Device
To disconnect your device from a personal computer, do the following:
On your personal computer, eject (stop) the device-related USB drive.
1.
On your a503 device, in the USB Disk Mode screen, press the Menu (left) soft key
2.
(
). The following options appear in the display:
Format Disk
•
Disconnect
•
Use the Up and Down navigation keys to highlight Disconnect.
3.
Press the
4.
the User Memory menu.
Disconnect the Data Cable from your device and the personal computer.
5.
132
for User Memory. The following options appear in the display:
key. You are prompted to enter the device password.
key. "Disconnecting" appears in the display followed by returning to
) to reset the stopwatch count to all zeros.
), then press
(for PLAN)
Advertisement
Table of Contents
