In standby mode, press the MENU (left) soft key (
1.
CUSTOMIZE),
The following call answer options appear in the display:
Slide Open — Sliding the device open or pressing
•
Open + Anykey — Sliding the device open or pressing any key except the
•
answers a call.
Open + Send Key — Sliding the device open or pressing
•
Use the navigation keys to highlight an option.
2.
Press the
3.
Call Forwarding
In standby mode, press the MENU (left) soft key (
1.
CUSTOMIZE), and
Forwarding.The following options appear in the display:
Set Number
•
Cancel
•
Use the navigation keys to highlight the method you wish to use for forwarding calls,
2.
then press the
Call Ignore
Call Ignore lets you control which incoming calls, if any, you wish to receive. Using Call
Rejection you can elect to reject calls from specified numbers, to receive calls only from
specified numbers, or to reject all incoming calls.
In standby mode, press the MENU (left) soft key (
1.
CUSTOMIZE), and
You're prompted to enter the password for your device.
Note: The default password is '0000'.
The following options appear in the display:
Settings — Lets you enable/disable Call Rejection; specify whether to reject calls from Saved
•
Numbers, Unsaved Numbers, or All Numbers; assign a Sound Effect to call rejections.
Ignore List — Lets you review and manage the list of Saved Numbers you selected in the
•
Call Log (see "Calls Log" on page 30 for more information) or entered directly using Set
Number.
Ignore Group — Lets you reject calls from one or more Contact Groups.
•
Tone Length
Use this menu to set DTMF settings to Short or Long.
(for Settings),
key to select the method for answering calls.
(for Settings),
key.
(for Settings),
), then press
(for Call), and
for Answer Call On.
@
.
?
answers a call.
answers a call.
), then press
(for Call), and
), then press
(for Call), and
Section 7: CUSTOMIZE
Call Settings
(for
@
.
?
key or
key
(for
@
.
?
for Call
(for
@
.
?
for Call Ignore.
79