Table of Contents
Advertisement
Vibrate Mode
In standby mode, press the MENU (left) soft key (
1.
CUSTOMIZE),
The following options appear in the display:
Ring Only — An incoming call plays the ringtone selected with the Ring options.
•
Vibrate — An incoming call causes the device to vibrate.
•
Light Only — An incoming call causes a message to appear in the display.
•
Vibrate then Ring — An incoming call causes the device to vibrate then play a ringtone.
•
Ring and Vibrate — An incoming call causes the device to play a ringtone then vibrate.
•
Use the Up and Down navigation keys to highlight Vibration, then press the
2.
Note: The Vibrate icon (
Adjust the Ringer
In standby mode, press the MENU (left) soft key (
1.
CUSTOMIZE),
Volume screen appears in the display.
Use the Up and Down navigation keys to highlight Ring Volume.
2.
Use the Left and Right navigation keys to adjust the Ring Volume to one of its five
1.
settings. The current ringtone sounds at the selected level.
When you are satisfied with the setting, press the
2.
Sound menu.
Camera Mode
Camera and Video Camera modes let you activate your device's camera to take pictures or
videos. In Camera/Video Camera mode, you can also adjust the resolution and appearance
of your pictures/videos.
See "Section 9: SNAP" on page 94 for more information.
•
Entering Camera Mode — In standby mode, press and hold the Camera key ( ) on the
lower right side of your device.
•
Entering Video Camera Mode — In standby mode, press the Camera key on the lower right
side of your device. The SNAP menu appears in the display. Select Video Camera.
•
Exiting Camera Mode — Press the
(for Settings),
) appears in the display when the device is in Vibration mode.
(for Settings),
), then press
(for Sound), and
@
.
?
), then press
(for Sound), and
@
.
?
key. Your device returns to the
key or the
key.
Section 2: Understanding Your Device
Your Device's Modes
(for
@
.
?
for Ring Vibration.
@
.
?
key.
(for
@
.
?
for Volume. The
25
Advertisement
Table of Contents
