Satellite Navigation Mounting Bracket - Tiger Xrt And Tiger Xca - Triumph Tiger XR Owner's Handbook Manual

Rotate the handlebar so that the
alignment marking on the handlebar
aligns with the split line on the upper
clamps/risers.
2
1. Upper clamp
2. Clamp split line
3. Alignment marking (Tiger XRX shown)
Tighten the 10 mm fixings to 35 Nm.
Refit the 8 mm fixings to the front
positions and tighten to 26 Nm.
Satellite Navigation Mounting
Bracket - Tiger XRT and
Tiger XCA
Tiger XRT and Tiger XCA models are
1
equipped with a satellite navigation
mounting bracket. The bracket features
a mounting plate that is compatible with
Garmin
3
Systems 660 and 220.
Other satellite navigation systems may
be compatible.
When installing a satellite navigation
system, refer to the manufacturer's
instructions.
To adjust the mounting plate, loosen the
pivot bolt and set the mounting plate to
the desired position. Retighten the pivot
bolt to 5 Nm.
cisf
1.
2.
The
bracket is also available as an accessory
kit from your authorised Triumph dealer.
General Information
Nuvi® Satellite
1
2
Mounting plate
Pivot bolt
satellite navigation
Navigation
mounting
79