Cirris 4200 Series Getting Started Manual
  1. Manuals
  2. Brands
  3. Cirris Manuals
  4. Test Equipment
  5. 4200 Series
  6. Getting started manual

Cirris 4200 Series Getting Started Manual

Hide thumbs Also See for 4200 Series:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Cirris 4200 Series Testers combine flexible testing capabilities with a simple,
touch screen user interface for ease of operation. This guide will help the new
user get started with the unit, by walking through the process of setting up the
tester, creating a test program, and testing a cable.
For more complete instructions, see the 4200 Series User Manual, which can
be found on the USB flash drive supplied with the tester.
In the Box
You should have received:
☐
Tester Unit
☐
Power Cable
☐
Power Supply
You may have also received:
■
Cirris Adapters
■
Tilt Stand
■
Expansion Boxes
Cirris 4200 Series
Getting Started Guide
4200 Series Getting Started Guide
☐
USB Flash Drive containing
manual and software
☐
USB Cable
☐
Probe
☐
WiFi Antenna
■
Performance Verification Kit
■
Smart USB to Serial Printer Cable
■
Label Printer
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4200 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Cirris 4200 Series

Summary of Contents for Cirris 4200 Series

  • Page 1 For more complete instructions, see the 4200 Series User Manual, which can be found on the USB flash drive supplied with the tester.

  • Page 2: Hardware Setup

    The antenna is used for WiFi access. For more information on networking and the Cirris Hub, see the Cirris Hub Manual and the 4200 Series User Manual. Both manuals and the Cirris Hub software installation are included on the USB flash drive supplied with the tester.
  • Page 3 (a complete list of the standard adapters can be found on the Cirris web site). However, if the DUT includes connectors that have no direct adapter mate, test cables can be used as a “bridge”...
  • Page 4 Signature: XXXXXX-00000 Manage Files Edit Test System Settings View Create Load Cirris 4250 Tester | SN: XXXXXXXX Calibration Verified: MM-DD-YY | Due: MM-DD-YY Operator: Press Edit Learn Settings to adjust settings per the cable Create New Test specifications. Learn Settings...

  • Page 5: Perform A Learn

    Cycles: 1 Cycle program on the Verify and Save Learned Test Program screen. Review the program and verify that the settings are correct and that the connections and any components match the documentation for the DUT. 4200 Series Getting Started Guide...
  • Page 6 By pressing Save As, you will be able to select a storage location and name for the test program. Navigate to a location within Manage Files the directory to save the test program. If you are using Cirris NewTest.wir Hub Software, saving files to New Folder the network location (F:) will...

  • Page 7: Common Errors

    Open Errors: A gap in the intended electrical path. Short: Unintended contact between two or more points. Miswire: The wire is terminated to an incorrect contact. For more information on errors, refer to the 4200 Series User Manual or cirris.com. 4200 Series Getting Started Guide...

  • Page 8: Finishing A Test

    NOT perform high voltage testing. It’s also prudent and necessary to protect workers from exposure to high voltage. Please see the 4200 Series User Manual for the complete high voltage warning and recommended safety measures before using the equipment.

Table of Contents