Distributed Evpn Gateway Configuration Example - H3C S10500 Series Configuration Manual

Interface: Vsi-interface1
IP address
10.1.1.1
10.1.1.10
10.1.1.20
# Verify that Switch C has created FIB entries for the VMs.
[SwitchC] display fib 10.1.1.10
Destination count: 1 FIB entry count: 1
Flag:
U:Useable
R:Relay
Destination/Mask
10.1.1.10/32
2. Verify that VM 1, VM 2, VM 3, and VM 4 can communicate with one another.

Distributed EVPN gateway configuration example

Network requirements
As shown in
•
Configure VXLAN 10 and VXLAN 20 on Switch A and Switch B to provide connectivity for the
VMs in the VXLANs across the network sites.
•
Configure Switch A and Switch B as distributed EVPN gateways to provide gateway services.
Configure Switch C as a border gateway to provide access to the connected Layer 3 network.
•
Configure Switch D as an RR to reflect BGP EVPN routes between Switch A, Switch B, and
Switch C.
Figure 14 Network diagram
MAC address
0003-0003-0003
0000-1234-0001
0000-1234-0003
G:Gateway
F:FRR
Nexthop
10.1.1.10
Figure 14:
VPN instance name: -
Router MAC
-
-
-
H:Host B:Blackhole
Flag OutInterface/Token
UH Vsi1
31
VSI Index Flags
0 GL
0 B
0 B
D:Dynamic S:Static
Label
Null