H3C S10500 Series Configuration Manual
Hide thumbs
Also See for S10500 Series:
- Configuration manual (50 pages) ,
- Interface configuration manual (35 pages) ,
- Command reference manual (16 pages)
Related Manuals for H3C S10500 Series
Summary of Contents for H3C S10500 Series
- Page 1 H3C S10500 Switch Series Comware 7 OAA Configuration Guide New H3C Technologies Co., Ltd. http://www.h3c.com.hk Software version: S10500-CMW710-R7536P05 Document version:6W100-20170630...
- Page 2 , H3CS, H3CIE, H3CNE, Aolynk, Care, , IRF, NetPilot, Netflow, SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of New H3C Technologies Co., Ltd. All other trademarksthat may be mentioned in this manual are the property of their respective owners Notice The information in this document is subject to change without notice.
- Page 3 Preface This configuration guide describes OAA fundamentals and configuration. It describes how to configure the H3C open application platform (OAP) module connected to your switch to exchange information between your switch and the OAP module. This preface includes the following topics about the documentation: •...
- Page 4 Convention Description example, the New User window opens; click OK. Multi-level menus are separated by angle brackets. For example, > File>Create>Folder. Symbols Convention Description Analertthatcallsattentiontoimportantinformationthatifnotunderstoodorfollowedcanresu WARNING! ltinpersonalinjury. An alert that calls attention to important information that if not understood or followed CAUTION: can result in data loss, data corruption, or damage to hardware or software.
- Page 5 It is normal that the port numbers, sample output, screenshots, and other information in the examples differ from what you have on your device. Obtaining documentation To access the most up-to-date H3Cproduct documentation, go to the H3C website at http://www.h3c.com.hk To obtain information about installation, configuration, and maintenance, click http://www.h3c.com.hk/Technical_Documents...
-
Page 6: Table Of Contents
Contents Configuring the OAP module ······························································ 1 Internal interfaces for OAP modules ······························································································· 1 Logging in to an OAP module ······································································································· 2 Logging in through the console port ontheOAP module ······························································· 2 Logging in through the management Ethernet port ontheOAP module by using SSH ························· 2 ... -
Page 7: Configuring The Oap Module
The Open Application Architecture provides an open interface for third-party vendors to develop and integrate value-added applications into H3C products. The hardware platforms for these applications can be devices or modules. H3C has developed the application-specific modules called Open Application Platform (OAP) modules shown in Table OAP modules have their own operating systems. -
Page 8: Logging In To An Oap Module
OAP module. Assign an IP address to the management Ethernet port of the OAP module. M ake sure the management Ethernet port and the SSH client (an H3C device or a PC with SSH client software) can reach each other. -
Page 9: Logging In Through The Internal Ethernet Interface Ontheoap Module By Using Ssh
Logging in through the internal Ethernet interface ontheOAP module by using SSH When installed in the expansion slot of a device, an OAP module exchanges information with the device through two internal interfaces:one serial port and one fast Ethernet interface. The fast Ethernet interface is used for this login method. - Page 10 • The OAP module is not operating correctly. For example, the OAP module does not respond to your operation. Pressing the reset button of the OAP module has the same effect. The device can still identify and control the OAP module after the module starts up again. Perform the following task in user view: Task Command...
-
Page 11: Configuring Oap
Configuring OAP Overview The Open Application Platform (OAP) is an open application protocol that is based on the Open Application Architecture (OAA). OAA allows products from different vendors to operate together to meet service requirements. Figure 2 OAA diagram As shown in Figure 2, OAA includes the following components: •... -
Page 12: Oapmanager Timers
OAPmanager timers The OAP manager uses the following timers: • Clock synchronization timer—Regularly triggers the OAP manager to send clock and time zone synchronization notifications to OAP clients. This mechanism keeps the clients' clocks synchronized with the manager's clock. • Client monitoring timer—Regularly triggers the OAP manager to send client monitoring packets to OAP clients. -
Page 13: Managing Oap Clients
Managing OAP clients IMPORTANT: This feature is available on the following modules: • LSU1FWCEA0 • LSUM1WCMX20RT • LSUM1WCMX40RT You can restart or shut down an OAP client. Restarting an OAP client Step Command Enter system view. system-view Restart an OAP client. oap client rebootclient-id Shutting down an OAP client This feature applies only to OAP clients on Linux. -
Page 14: Index
Index ACFP function OAP, OAP client, OAP function configuration, OAP manager, OAP manager configuration, application control forwarding protocol. SeeACFP interface OAP module internal Ethernet interface login, internal interface OAP module CLI login, OAP module, client OAP client management, logging in OAP client monitoring timer, 6, 6 OAP module,... - Page 15 OAP module configuration, logging in to OAP module (internal Ethernet interface login), OAP module internal interface, logging in to OAP module (management Ethernet port login), managing OAP client, OAP function configuration, resetting OAP module, OAP manager configuration, restarting OAP client, OAP module CLI login, setting OAP client monitoring timer, OAP module configuration,...
Need help?
Do you have a question about the S10500 Series and is the answer not in the manual?
Questions and answers