Configuring Evpn; Hardware Compatibility Restrictions; Evpn Configuration Task List; Creating A Vxlan On A Vsi - H3C S10500 Series Configuration Manual

Configuring EVPN

Hardware compatibility restrictions

VXLAN transport-facing interfaces must be on the following SG interface modules:
•
LSUM2QGS12SG0.
•
LSUM2TGS32QSSG0.
•
LSUM2TGS48SG0.

EVPN configuration task list

Tasks at a glance
(Required)
(Required)
(Required)
(Required)
(Optional.) Configuring an EVPN gateway:
•
Configuring a centralized EVPN gateway
•
Configuring a distributed EVPN gateway
(Optional.)
learning
(Optional.) Enabling BGP EVPN route advertisement to the local site
(Optional.)
(Optional.)

Creating a VXLAN on a VSI

Step
1. Enter system view.
2. Enable L2VPN.
3. Create a VSI and enter
VSI view.
4. (Optional.) Configure a
VSI description.
5. Enable the VSI.
Creating a VXLAN on a VSI
Configuring an EVPN instance
Configuring BGP to advertise EVPN routes
Mapping an Ethernet service instance to a VSI
Managing remote MAC address entries and remote ARP
Confining floods to the local site
Enabling ARP flood suppression
Command
system-view
l2vpn enable
vsi vsi-name
description text
undo shutdown
Remarks
N/A
N/A
N/A
Perform this task to assign customer
traffic to VXLANs.
Perform this task to provide Layer 3
connectivity for VXLANs.
N/A
Perform this task to advertise private
BGP EVPN routes to the local site.
Perform this task to reduce flooding
to the transport network.
Perform this task to reduce ARP
request broadcasts.
12
Remarks
N/A
By default, L2VPN is disabled.
By default, no VSIs exist.
By default, a VSI does not have a
description.
By default, a VSI is enabled.