H3C S10500 Series Configuration Manual
  1. Manuals
  2. Brands
  3. H3C Manuals
  4. Switch
  5. S10500 Series
  6. Configuration manual
H3C S10500 Series Configuration Manual

H3C S10500 Series Configuration Manual

Hide thumbs Also See for S10500 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
H3C S10500 Switch Series
EVB

Configuration Guide

Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Software version: S10500-CMW710-R7523P01
Document version: 6W100-20160830

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S10500 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for H3C S10500 Series

Summary of Contents for H3C S10500 Series

  • Page 1: Configuration Guide

    H3C S10500 Switch Series Configuration Guide Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com Software version: S10500-CMW710-R7523P01 Document version: 6W100-20160830...
  • Page 2 , H3CS, H3CIE, H3CNE, Aolynk, Care, , IRF, NetPilot, Netflow, SecEngine, SecPath, SecCenter, SecBlade, Comware, ITCMM and HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd. All other trademarks that may be mentioned in this manual are the property of their respective owners Notice The information in this document is subject to change without notice.
  • Page 3 EVB, configure negotiation parameters, and establish S-channels between the EVB station and the EVB bridge. This preface includes the following topics about the documentation: • Audience. • Conventions. • About the H3C S10500 documentation set. • Obtaining documentation. • Technical support.
  • Page 4 Convention Description Asterisk marked braces enclose a set of required syntax choices separated by vertical { x | y | ... } * bars, from which you select at least one. Asterisk marked square brackets enclose optional syntax choices separated by vertical [ x | y | ...
  • Page 5 Represents a security card, such as a firewall, load balancing, NetStream, SSL VPN, IPS, or ACG card. About the H3C S10500 documentation set The H3C S10500 documentation set includes the following categories of documents: Category Documents Purposes...

  • Page 6: Obtaining Documentation

    System log messages Explains the system log messages. Obtaining documentation Access the most up-to-date H3C product documentation on the World Wide Web at http://www.h3c.com. Click the following links to obtain different categories of product documentation: [Technical Documents]—Provides hardware installation, software upgrading, and software feature...

  • Page 7: Table Of Contents

    Contents Configuring EVB ····························································································· 1 Overview ···························································································································································· 1 Basic concepts ··········································································································································· 2 EVB working mechanism ··························································································································· 2 Protocols and standards ···························································································································· 3 Feature and hardware compatibility ··················································································································· 3 Licensing requirements ······································································································································ 3 Configuration restrictions and guidelines ··········································································································· 3 EVB and feature compatibility ···················································································································· 3 EVB and feature configuration restrictions ·································································································...

  • Page 8: Configuring Evb

    Configuring EVB Overview Edge Virtual Bridging (EVB) allows virtual machines (VMs) on a physical server to obtain bridge relay services through a common bridge port. It enables coordinated configuration and management of bridge services for VMs. Data center virtualization includes network virtualization, storage virtualization, and server virtualization.

  • Page 9: Basic Concepts

    Basic concepts Figure 2 shows the components on the EVB station and EVB bridge. Figure 2 EVB architecture • Edge Relay—An ER transfers packets between one URP and one or more DRPs. An ER has one or more DRPs and one URP. Both URP and DRPs are called ER ports. An EVB station can have multiple ERs.

  • Page 10: Protocols And Standards

    When a station shuts down a VM, it sends a VDP de-associate packet to the bridge. The bridge sends the request to the VSI manager, and the VSI manager notifies the bridge to delete the VSI interface. An EVB station and an EVB bridge perform the following steps to manage VM traffic: Use CDCP to establish an S-channel.

  • Page 11: Evb And Feature Configuration Restrictions

    Feature Reference VXLAN VXLAN Configuration Guide MPLS L2VPN MPLS Configuration Guide VLAN mapping QinQ Layer 2—LAN Switching Configuration Guide MAC VLAN Voice VLAN MAC authentication Security Configuration Guide Port security EVB and feature configuration restrictions When you configure an EVB-enabled interface, follow these restrictions and guidelines: •...

  • Page 12: Enabling Evb

    Tasks at a glance (Optional.) Configuring a VSI interface or VSI aggregate interface: • Creating a VSI interface or VSI aggregate interface • Configuring a VSI filter • Activating a VSI interface or VSI aggregate interface Enabling EVB Perform this task to enable EVB on an interface that directly connects to a station. For VSI filter configuration (see "Configuring a VSI filter") to take effect, you must configure the interface to...

  • Page 13: Specifying A Default Vsi Manager

    Step Command Remarks interface view or Layer 2 interface-number aggregate interface view. Enable LLDP on the By default, LLDP is enabled on an lldp enable interface interface. Configure the Nearest non-TPMR Bridge agent for lldp agent nearest-nontpmr The default mode is disable. LLDP to operate in TxRx admin-status txrx mode.

  • Page 14: Configuring An S-Channel

    Step Command Remarks Enter system view. system-view Enter Layer 2 Ethernet interface interface-type interface view or Layer 2 interface-number aggregate interface view. Set the VDP evb vdp timer resource-wait-delay timer resource-wait-delay exponent The default is 20. exponent. value Set the VDP keepalive timer evb vdp timer keepalive The default is 20.

  • Page 15: Configuring An S-Channel Interface Or S-Channel Aggregate Interface

    Configuring an S-channel interface or S-channel aggregate interface Step Command Remarks Enter system view. system-view Enter S-channel interface interface { s-channel | view or S-channel aggregate schannel-aggregation } interface view. interface-number:channel-id By default, the expected bandwidth of an interface is the (Optional.) Set the expected bandwidth bandwidth-value default maximum bandwidth of...

  • Page 16: Configuring A Vsi Interface Or Vsi Aggregate Interface

    • After you disable the MAC address learning function for an S-channel, the bridge will discard packets with an unknown source MAC address. • The undo evb mac-learning forbidden command and the mac-address mac-learning enable command must be configured together to avoid communication interruption. For more information about the mac-address mac-learning enable command, see Layer 2—LAN Switching Command References.

  • Page 17: Configuring A Vsi Filter

    Step Command Remarks an S-channel. Configuring a VSI filter The EVB bridge uses a VSI filter to identify VSI traffic for a VM. Typically a VSI manager assigns filters to VMs. Perform this task to manually create or remove a VSI filter. A VSI filter contains a set of VID values, MAC addresses, and group ID values.

  • Page 18: Activating A Vsi Interface Or Vsi Aggregate Interface

    The Layer 2 aggregate interface where the S-channel that is associated with the S-channel aggregate interface is created. • Do not create a VSI filter that contains the same VLAN on the same VSI aggregate interface or on other VSI aggregate interfaces that belong to the same S-channel aggregate interface. If you do so, the system displays an error message.

  • Page 19: Displaying And Maintaining Evb

    Displaying and maintaining EVB Execute display commands in any view and the reset command in user view. Task Command Display CDCP negotiation display evb cdcp [ interface interface-type interface-number ] information. display evb evb-tlv [ interface interface-type { interface-number | Display S-channel EVB TLV negotiation information.

  • Page 20: Configuration Procedure

    Figure 3 Network diagram Configuration procedure This section only contains EVB configurations. Configuring the EVB bridge # Create VLAN 100 on EVB bridge 1. <EVB_bridge1> system-view [EVB_bridge1] vlan 100 [EVB_bridge1-vlan100] quit # Enable EVB on GigabitEthernet 1/0/1 that connects to EVB station 1, and configure GigabitEthernet 1/0/1 to operate in trunk mode.
  • Page 21 Configuring the EVB station Configure the EVB station on the VMM. For more information about configuring VMs through the VMM, see the VMM manual. (Details not shown.) Configuring the NMS Use VAN Connection Manager of IMC on the NMS to configure network resources. The IMC PLAT 5.2 (E0401) and IMC CRM 5.2 (E0401) versions are used in this section.
  • Page 22 Figure 5 Edge Switch List page Add an FTP network: Select Network from the navigation tree, click Add on the page that appears, enter For FTP for Name, 100 for VLAN ID, and 10 for Max. Connections, and click OK. The network name For FTP is displayed on the Network List page, as shown in Figure Figure 6 Network List page...

  • Page 23: Verifying The Configuration

    a. Select Connection from the navigation tree, and click Add on the Connection List page. b. Enter VM1CON for Name. c. Click Select on the right side of the page, select the VM1 option from the popup window. Then, click OK (the MAC address 0050-5684-21c7 of VM 1 is displayed in the vNIC field). d.

  • Page 24: Index

    Index activating edge EVB VSI aggregate interface, EVB edge relay, EVB VSI interface, Edge Virtual Bridging. Use enabling EVB, bridging EVB S-channel RR mode, EVB configuration, 1, 4, EVB default VSI manager, basic concepts, EVB LLDP configuration, configuration, 1, 4, EVB S-channel aggregate interface, configuration restrictions, EVB S-channel configuration,...
  • Page 25 configuring EVB VDP negotiation parameter, configuring EVB VSI filter, hardware creating EVB S-channel, EVB compatibility, creating EVB VSI aggregate interface, creating EVB VSI interface, LLDP disabling EVB S-channel MAC address learning, EVB LLDP configuration, displaying EVB, enabling EVB, MAC addressing enabling EVB S-channel RR mode, EVB S-channel MAC address learning, maintaining EVB,...
  • Page 26 EVB negotiation parameter, virtual EVB virtual station interface. See Virtual Ethernet Bridge. Use VEBVSI aggregate interface activation, aggregate interface configuration, aggregate interface creation, Discovery Configuration Protocol. See EVB default VSI manager, EVB virtual station interface, filter configuration, interface activation, interface configuration, interface creation, VDP negotiation parameter,...

Table of Contents