Removing Debris From The Brushbar; Changing The Brushbar - Vax MachAir UCA1GEV1 Quick Start Manual

CAUTION: To reduce the risk of electric shock, turn the vacuum cleaner off and unplug from the electrical outlet
before performing maintenance/troubleshooting checks.

Removing debris from the brushbar

Switch off your vacuum cleaner
at the main socket. Using a pair
of scissors cut any hair or debris
free from around the brushbar.

Changing the brushbar

IMPORTANT: Unplug and switch off the vacuum cleaner before maintenance or troubleshooting checks.
Using a crosshead screwdriver,
remove the 3 screws from the belt
cover on the side of the floorhead.
Lift and separate the brushbar
side cover.
Taking care of your machine
Pull to remove the belt cover.
Pull the brushbar through the
side cover to remove.
Pull to remove the brushbar
location plate. Remove the belt.
PULL