Dirt/Debris From Turbotool; Removing Debris From Brushbar - Vax Impact 502 Let's Get Started

IMPORTANT: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks.
Removing debris from the brushbar
Using a pair of scissors
remove any threads or
hair caught around the
brush bar.
Removing dirt/debris from TurboTool (some models only)
Slide the locking ring
to remove.
Using a pair of
scissors cut any hair
or debris free from
around the brushes.
Lift and separate
the housing.
Line up the tabs on front
of the housing and re-fit.
Slide locking ring into
groove to secure.
Let's talk technical