Removing Debris From The Brushbar - Vax UCNBAWP1 Let's Get Started

IMPORTANT: Unplug and switch off the vacuum cleaner before performing maintenance or troubleshooting checks.

Removing debris from the brushbar

Using a pair of scissors, remove
any threads or hair caught
around the brushbar.
Removing a blockage from the hose
Remove the hose end from the
hose to machine connector.
Insert a broom handle or
similar blunt instrument into
the hose to remove blockage.
Lift the clip under
the hose inlet.
To reassemble, line up the latch on the
accessory hose and push until it clicks
into place. Push the other end of the
hose into the hose to machine connector.
Let's talk technical
Pull the latch out and
remove the hose.
Test for blockages by dropping a
small ball of paper through the
hose. Remove any blockage
by inserting wire.