Attaching The Hopper/Wall Mount - Weston 05-0301 Manual

ATTACHING THE HOPPER/WALL MOUNT

ATTACHING THE HOPPER TO THE APPLE & FRUIT CRUSHER* IN THE
WALL MOUNT POSITION:
1. Remove both sets of nuts,
washers and carriage bolts
securing the mounting board to
the top feet on the Apple & Fruit
Crusher. FIGURE 7
2. Set the assembled Hopper on
top of the Apple & Fruit Crusher.
FIGURE 8
3. Attach the Left Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the 1½"
Machine Screw, two Flat Washers
& Hex Locking Nut (7). FIGURE 9
4. Attach the Right Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the 1½"
Machine Screw, two Flat Washers
& Hex Locking Nut (7).
CAUTION!
Remove Both Sets
FIGURE 9
NEVER reach into the Chute or Main Body.
Failure to do so, may cause personal injury.
*Apple & Fruit Crusher Sold Separately.
FIGURE 7
FIGURE 8
7