Attaching The Motor Onto Pasta Machine; Ravioli Adapter - Weston 01-0101 Manual

ATTACHING THE MOTOR ONTO THE PASTA MACHINE
ATTACHMENTS
WARNING! Before cleaning, assembling or disassembling the
Motor Attachment, make sure the Motor is in the OFF Position (O)
and the PLUG IS REMOVED FROM THE OUTLET/POWER SOURCE!
1. Follow instructions 1 through 6 of the "INSTALLING THE MOTOR ONTO
THE PASTA MACHINE" instructions.
2. Line up the Motor Shaft with the drive hole on the pasta machine
attachment and rotate the Motor into place, allowing the left part of the Motor
to come to rest on the Motor Mounting Bracket.
3. After Motor is positioned on the Motor Mounting Bracket, rotate the Movable
Arm counter-clockwise so it is positioned on the Motor.
4. Once Motor is attached, and you have verified the Power Switch is in the off
position (O), plug the unit into the power source.
RAVIOLI ADAPTER INSTRUCTIONS
The included Ravioli Adapter is to be used with
the ravioli attachment when using the Motor.
1. Follow instructions 1 through 5 of the
"INSTALLING THE MOTOR ONTO THE
PASTA MACHINE" instructions.
2. Install the Ravioli Adapter onto the Motor by
inserting the female end of the Ravioli Adapter
onto the male end of the Motor Shaft.
FIGURE 8
3. Line up the Motor and Adapter Shaft with the
drive hole of the ravioli attachment and rotate
the Motor into place, allowing the left part of the
Motor to come to rest on the Motor
Mounting Bracket. FIGURE 9
4. After Motor is positioned on the Motor
Mounting Bracket, rotate the Movable Arm
counter-clockwise so it is positioned on the
Motor.
5. Once Motor is attached and you have
verified the Power Switch is in the off position
(O), plug the unit into the power source.
NOTE: It is suggested when using the Motor
with the ravioli attachment, only use the
intermittent Ravioli Switch. This will allow you
to stop and start the Motor as you fill the ravioli.
Male End of

Ravioli Adapter

Female End of
Ravioli Adapter
Ravioli
Adapter
Ravioli
Attachment
Motor
Shaft
FIGURE 8
FIGURE 9
9