Attaching The Hopper/Table Mount - Weston 05-0301 Manual

ATTACHING THE HOPPER/TABLE MOUNT

TO ATTACH THE HOPPER TO THE APPLE & FRUIT CRUSHER* IN THE
TABLE MOUNT POSITION:
1. Set the assembled Hopper on
top of the Apple & Fruit Crusher*.
FIGURE 5
2. Attach the Left Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the
1½" Machine Screw, two Flat
Washers & Hex Locking Nut (7).
FIGURE 6
3. Attach the Right Mounting
Bracket to the top foot on the
Apple & Fruit Crusher with the
1½" Machine Screw, two Flat
Washers & Hex Locking Nut (7).
CAUTION!
6
FIGURE 6
NEVER reach into the Chute or Main Body.
Failure to do so, may cause personal injury.
*Apple & Fruit Crusher Sold Separately.
FIGURE 5